Back to Blog

Chair Pockets

Hello! I love chair pockets! Chair pockets (or seat pockets) can be handy to "stash" those school supplies, guided reading materials, math manipulatives, or any other classroom resources! If you want to create them yourself, I share my easy-peasy (and cheap!) way to make your own chair pockets below.

Don't feel like sewing? Click here to visit Amazon and shop for chair pockets with my affiliate link.
{It costs you nothing, and Amazon gives me enough to purchase a cup of coffee, which I drink while working on this website.}

Here's an inexpensive way to create chair pockets for your classroom with minimal sewing skills (4 straight lines per seat cover - promise!)  You'll need an iron, scissors, measuring tape, and some fabric.  Warning - lots of pictures ahead!!  :)

Step 1: Score some fabric.  I visited my local thrift store and bought sturdy tablecloths, fabric shower curtains, and curtains.  If you want to be all matchy-matchy, this approach won't work for you... Bear in mind that I created 25 of these for less than $20.00 using the thrift store fabrics (and a few yards of fabric from my mom).  The key here is to make sure the fabric isn't frayed and that it looks like it will take the abuse of a 7 year old jamming a pencil in with their journals without popping a hole in the fabric.  Wash and dry the fabric so it will go ahead and shrink if it's going to.  :)

Step 2: Measure twice, cut once.  For reals.  (Don't use your favorite fabric on your first attempt.  Trust me! The first one I made was hideous, and I had forgotten a step somewhere along the line.  The first one took me about 30 minutes.  Now I can make one in about 5 minutes.)  We use "standard" metal/plastic student chairs... please make sure to adjust the measurement if needed to fit your chairs.  I cut the fabric into rectangles 17 1/2" wide x 45" long.
17 1/2 inches wide
45 inches long
Step 3:  Fold over the short side about 1/2", iron it flat, and fold it over again.  Sew a line close to the folded edge.  I use zigzag stitches on my sewing machine; I think I heard somewhere that a zigzag stitch is a bit more durable.  If that's not true, you can correct me!!  Repeat the fold, iron, fold, iron, sew a line on the other short side.
Fold over the short end 1/2" twice and iron
Sew a straight-ish line to secure the end.
 Step 4:  Lay the fabric flat, wrong side up.  Fold the first short side in 1/3, then fold the other short side in 1/3.  It will look a bit strange, like it only makes 1 pocket.  This is the step I messed up the first time I made a chair pocket.  Trust me.  You only have 2 more lines to sew - almost there!
Fold the short side in 1/3 of the way.
Then fold the other side in 1/3 of the way.
It will look like it only makes one pocket.  Trust me - this works.  :)
Step 5: Sew a straight line across the top and the bottom.  For added durability, serge or zigzag stitch twice to keep the sides from fraying.  Just sayin'. 
Zigzag stitch along the top and bottom.
Step 6:  Lift the top of the pocket and look inside.  See the little flap inside?  Grab it and gently pull it out.  This turns the pocket inside out, allowing for "both" pockets - one to slide over the back of the chair and the other to store supplies.
Peek inside and see the little flap.
Gently pull the flap out and turn the pocket inside out.
It'll look like this.  :)
The "wrong side" is showing, but that part doesn't show when the chairs are pushed in (or kiddos are sitting in them!)
You're done!  :)
I hope this helps you utilize chair pockets in your classroom instead of having to pay so much out of pocket.  I made the set in my classroom almost 3 years ago when I decided to go back in the classroom, and I can't imagine teaching without them.  We only have tables in our classroom (no desks!) and I love having a spot for my green beans to store journals, their math workbook, and their pencil pouch.  The original set has held up very well.  I take them home during each track out (at the end of each quarter) and run them through the washing machine.  Make sure to shake them out well, so you don't have a crayon in the wash.  :)  The striped ones I made today will go at my small group table to hold dry erase boards and supplies.

Want to download the tutorial as a pdf?  Click the picture to download for free from Teachers Pay Teachers.  Don't forget to leave feedback.  :)
Download from TpT for free here
Does this look like too much for you to tackle today? Click on this link to see reasonably priced durable Seat Sack from Amazon. {affiliate link}
Do you already use chair pockets in the classroom?  What do you like/not like about them?


Popular posts from this blog

Word Work for Upper Elementary: Build a Mystery Word

Veteran's Day Free Word Work, grades 1-3

How to Teach Phonics Intervention Lessons for Grades 3-5